Product Description - peCAMit T

peCAMit T is an IP camera with a CMOS image sensor and a PIR (Passive Infrared Detector). It is a stand alone IP camera with Internet accessibility using dynamic IP. Just connect it to the Ethernet port of the network switch or router. It provides dual mode detection by 48 zone motion detection and PIR to reduce false alarm. When the camera is triggered, it will send e-mail with JPEG attachments to you. You could access it and turn on/off your appliances through the peCAMit from anywhere in the world as long as you could connect to the internet with your PC, Pocket PC, Smartphone or MIPD2.0 Mobile phone.

General Features

The camera uses our proprietary worldwide free IP gatekeeper for dynamic IP to make the cameras plug and play. There would be no setup needed between the router and the cameras. They are specially designed for managing and marketing your business and could also be scheduled to enter into security mode or activate the security mode remotely by mobile phone. The general features are:

  • 48 Zone selectable motion detection
  • Built in real time clock for scheduling security mode, recording
  • Patented Plug and Play for multiple cameras using dynamic IP
  • Encrypted data
  • View from PC, Pocket PC, Smartphone and Java phone
  • Optional Remote Camera Services for you to generate monthly recurring revenue
  • Send e-mail upon motion detection or optional external trigger, e.g.: contact sensor

Special Feature for peCAMit T

  • Dual trigger mode by motion detection and/or Passive Infrared Detection
  • One trigger-in and One trigger-out
  • Daisy chained to powerBox for turn on/off the AC power

Application Software

    • Use a PC with Windows Application Software or Internet Explorer to view the cameras peer to peer without the data going through a server.
    • Use eCAMit T Java Midlet for the MIDP2.0 Java phones to view, activate, deactivate the camera peer to peer without the data going through a server.
    • Use eCAMit T AP for Pocket PC to view the cameras peer to peer without the data going through a server.
    • Windows Application Software ( eCAMit Deluxe AP ) Features:
      i.  Schedule security mode daily or weekly
      ii.  Schedule auto-recording daily or weekly
      iii.  Snapshot
      iv.  Replay recorded images
              v. Up to sixteen cameras display on Windows based Application Software

Specifications of peCAMit T

    • Power consumption: 9V DC, ~190mA
    • Cable Connections: screw terminals for Ethernet, 9V DC, Trigger in and Trigger Out
    • Trigger in: NO or NC (Software Selectable) or 5V level trigger
    • Motion detection sensitivity: High, Medium, and Low
    • Motion Detection Zones: 48
    • Trigger out: Low to High TTL Level 5V
    • Internet Protocol for IP connection: UDP
    • UDP Port Used: any plus the last field of the IP (firewall, if any, has to allow these ports to go through)
    • Transmission Speed:
      High Resolution (640x480): maximum 6 frames/second Medium Resolution (320x240): maximum 10 frames/second Low Resolution (160x120): maximum 15 frames/second
    • Camera Specification:
    • CMOS Camera support Specification:

                    300K pixels, 1/3

                    S/N Ratio: > 48dB

                    Gamma Correction: 0.45

                    Min. Illumination: <2.5 lux @ f2.0

                    Default Lens: (others are available as optional Lens .)

      Focal Length 3.7mm
      Back Focal Length 3.3mm
      Aperture F 2
      Angle of View (DIA)90o
    • Operation Environment:

                    Temperature: 0oC~55oC Humidity: 85% relative at 25oC

    • Weight: ~150g
    • Dimension of Main Body: 11.5cm x 6.0cm x 4 cm

*Specifications are subject to change without notice