Product Description - wifiCAMit

3JTech has developed a series of plug and play Wi-Fi cameras. With proprietary wifiDHCP technology and Plug & Play Infrastructure, it is very easy setup. Just plug wifiCAMit directly to an Ethernet port to the Dedicated Wifi Router (DWR) before installing the camera to the location you would like, and the camera will automatically be located for viewing. You will be able to view the camera site in real-time from anywhere in the world with Internet access. Through our RCS (Remote Camera Service) system, you will also be able to control the camera from any PC/Notebook/Mobile phone/PDA phone over the web browser and save the event images at the RCS site. Other service from RCS includes: ( various views>>> )

   1) SMS/ MMS/ e-mailing upon triggered
   2) HTTP Mobile phone flashing from the camera
   3) RTSP Streaming for the camera

The DWR could be connected to your existing router with DHCP (assigns IP addresses automatically). No setup or modification is needed for your existing network.
(For more details about the wifiRouter, please refer to wifiRouter)

wifiCAMit supports wireless RFIO to connect with the wireless RF Sensor to be able to trigger the camera as a security alarm. wifiCAMit can send the triggered event by means of SMS, MMS and/or e-mail via RCS system to authorized users. It can also record triggered images to RCS system at the same time.

Physical Specification:

• OS Linux 2.4 kernel
• Ethernet RJ45, auto-sensing 10/100 Base-T
• DC 5V / 750mA
• Dimension: 5.5 x 4 x 9.5 cm(without the stand)
• Weight:150gm (without the stand)

Image Sensor Specification:

• 1/4 " CMOS sensor (OV 7725)
• Sensitivity: 3.0 V/LUX-Sec
• Video Format: JPEG/MJPEG
• Frame Rate: 3+fps@VGA, 6+fps@QVGA , 7+fps@QCIF
• Video Resolution: 176x144, 320x240, 640x480
• Light Frequency: 50Hz, 60Hz
• Adjustable Brightness / Contrast / Saturation

Wireless Operation Mode:

• Ad Hoc / Infrastructure

Encryption Type:

• WEP (5 ASCII / WEP 13 ASCII), WEP (10 HES / 26 HEX)
• WPA / TKIP, WPA / AES

Optional Security Accessories:

powerBox

• Adaptor input range:
  powerBox_5: 4.5 ~ 5.25 VDC
  powerBox_9: 9VDC
• Power Consumption: 60mA
• AC plug voltage level: AC 100 to AC 240V
• Maximum load current: 5A
• Reset-able fuse: 5A

RF Sensor

• Built-in 3.6V/2100mAH battery
• Trigger input contact for alarm sensor from wire to wireless
• LED status indication
• ON/OFF switch
• Working frequency: 433 MHz
  (Programmable 315 MHz, 868 MHz and 915 MHz)
• Power consumption:
  TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
• High sensitivity (-110 dBm at 1.2 kbps)

RF Flip

• Built-in 3V/200mAH battery
• Enable RFIO function button
• Disable RFIO function button
• LED status indication
• Working frequency: 433 MHz
  (programmable 315Mhz, 868Mhz and 915 MHz)
• Power consumption:
  TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
• High sensitivity (-110 dBm at 1.2 kbps)

RFIO

• Working frequency: 433 MHz
  ( programmable 315Mhz, 868Mhz and 915 MHz)
• Power consumption:
  TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
• High sensitivity (-110 dBm at 1.2 kbps)

* Specifications are subject to change without notice.