This Two Line Phone Wireless Router has a built in HSUPA modem and WAN port for internet access. It is also a built-in Fixed Wireless Phone and one of the line can be connected to a regular PSTN line . It has features such as load balancing and fail-over between WAN and 3G network. Other features include conference calling to mobile and PSTN line and SMS.
General Feature:
- Internet access over WAN (support DHCP, Static IP, PPPoE) and internal HSUPA modem
- Fail-over from WAN to 3G or Load Balance among WAN and 3G
- WiFi access point (Internal antenna)
- FWP (Fixed Wireless Phone)
- Short message SMS
Calling Features
- Call Waiting
- Call Barring
- Call Forwarding
- Call Conferencing
- Caller ID
Specifications of Internal Cellular Modem
Please click download
For HSPA
Output Power (GSM / 3G)
- Class 3 for UMTS/ HSDPA/ HSUPA
- Class 4 for GSM 900
- Class 1 for GSM 1800
- Class E2 for EDGE 900/1800
Frequency Bands (GSM / 3G)
- Tri Band UMTS/HSPA 850/1900/2100MHz
- Quad Band GSM (GPSR/EDGE) 850/900/1800/1900MHz
Data (cellular interface):
- HSUPA uplink up to 5.76Mbps
- HSDPA downlink up to 7,2Mbp
- WCDMA (UMTS) up to 384Kbps
- EDGE class 12 - up to 118Kbps (UL), 236,8Kbps (DL)
- GPRS class 12 - up to 42,8Kbps (UL), 85,6Kbps (DL)
WiFi Specification
Output Power (WiFi)
- 802.11n:11 dbm
- 802.11g:13 dbm
- 802.11b:15 dbm
Sensitivity (WiFi):
- 802.11n : -68 dBm
- 802.11g : -68 dBm
- 802.11b : -85 dBm
Wi-Fi Frequencies
- 2,4 - 2,462 GHz, CCK / OFDM (Modulation Range Coverage)
WiFi Distances
- Indoor: approximately 30 to 50 meters
- Outdoor: 80 to 100 meters
Compatibility
- IEEE 802.3 10 Base-T Ethernet
- IEEE 802.3u 100 Base-TX Fast Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.11 b/g/n Wireless
Mechanical Specifications
- Plastic Housing with External Connectors
- Dimension (L x W x H): 210 x 165 x 80 mm
- Weight: 500g
- Operation Temperature: -10oC ~ +55oC
- Storage Temperature: -20oC ~ +60oC
- Storage Humidity : 5% to 85% of relative humidity (with no condensation)
Connection Interfaces
- WAN Ethernet Interface 10/100 Base-TX, connector RJ-45
- LAN Ethernet Interface 10/100 Base-TX, connector RJ-45
- RJ11 FXS Interface for extension phone
- RJ11 for PSTN line
- SMA Connector for external 5 bands 3G antenna
- Internal SIM Card Reader: Chip SIM CR 3.0V, 1.8V
SMS
- Point to Point MO and MT
- SMS Cell Broadcast
- Support PDU and Text mode
Voice
- Vocoders: 13K, QCELP, EVRC
- Support DTMF
Router Specifications
Firewall
- IP and MAC Filter
- Virtual Server and DMZ
- NAT (Network Address Translation)
Communication Protocols
- IP, NAT, DHCP, PAP, CHAP, PPP, TCP, UDP, HHTP, NTP
(other protocols upon request)
Power Specifications
AC-DC Power Adapter
- Input: 90 to 240 VAC / 0.3A
- Frequency: 50/60 Hz
- Output: 8 VDC / 1 A
DC Input
- Input Voltage Range: 8 to 12 VDC
- Input Power: 12 W
- Input Connector: J4 (internal positive)
*Specifications are subject to change without notice
| Produce Name | Model | Description |
| FWT | F_6100 | built-in HSUPA modem (1xLAN, 1x3G, 1xwifi ,1x RJ11) |
| FWT Wifi AP | FWT_6100 | built-in HSUPA modem (1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11) |
| FWT_7300 | built-in HSPA+ modem (1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11) |
|
| FWT_8300 | built-in LTE modem for China (1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11) |
|
| FWT_8301 | built-in LTE modem for Asia (1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11) |
|
| FWT_89 | uilt-in EVDO A modem (1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11) |
|
| FWT Wifi AP_USBx4 | FWTU4_6100 | built-in HSUPA modem (4xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11, 3xUSB port) |
| FWTU4_7300 | built-in HSPA modem (4xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11, 3xUSB port) |
|
| FWT_8300 | built-in LTE modem for China (4xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11, 3xUSB port) |
|
| FWT_8301 | built-in LTE modem for Asia (4xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11, 3xUSB port) |
